About the "8ms" and "120hz" processing, according to JVC the new 1080p-version 120hz processing works better with SLOWER response times, like 8ms, than if you had a panel with "ZEROms" response. See quote from above link below...
-from JVC press release: "An indication of CMD’s ability to deliver sharp images is the panel’s motion picture response time, or MPRT. Though liquid crystal response time has long been used as a measure of LCD TV performance, JVC considers MPRT, a relatively new measurement gaining wider use, to be a better performance indicator. MPRT measures the rate of image blurring and is based on how the human eye perceives speed. A faster MPRT means less blurring.
JVC research shows that for any given liquid crystal response time, the MPRT will be significantly better at 120Hz than at 60Hz. In addition, the improvement is more apparent at lower response times. A 120Hz-driven LCD panel with an eight millisecond liquid crystal response time will achieve an MPRT figure that’s superior to what a 60Hz-driven panel with a zero millisecond liquid crystal response time can achieve. As a result, the 120Hz panel will have less blurring of moving images.
To get the most out of the double-speed full HD panels, JVC will use its fifth generation D.I.S.T. (Digital Image Scaling Technology) engine on the JVC-exclusive 32-bit Genessa chip. This optimizes processing for more natural shades of grey compared to an 8-bit panel. JVC’s 10-bit panel with the Genessa chip also renders more than one billion colors for rich, natural color reproduction. Also, with a 10-bit panel the reproducible color gamut is 102 percent based on the NTSC standard, displaying full edge-to-edge color of an NTSC picture. And finally, the single-chip processing ensures superior detection, analysis and control of the signal in real time.
JVC will launch its new High Speed 2 line this fall, comprised of three sets featuring Clear Motion Drive II – the 47-inch LT-47X898, the 42-inch LT-42X898 and the 37-inch LT-37X898. Each will offer three HDMI (1.3) compatible inputs. They will also feature a new cabinet that pushes JVC’s design mantra of “maximum screen, minimum cabinet” farther than previous models, with a bezel that measures less than 1.5 inches all the way around and a cabinet that is shorter and narrower than previous models in the same screen size."
“An engineer explained to us that hundreds of ear impressions were gathered in the name of research, and while each one obviously boasted its own unique shape and size, one single characteristic remained uniform across the board: the entrance into the ear canal is not a perfect circle, it's an oval.â€
Now that we've thrown 'em off the trail, use the form below to get in touch with the people at Engadget. Please fill in all of the required fields because they're required.
http://www.jvc.com/press/index.jsp?item=588&pageID=1
About the "8ms" and "120hz" processing, according to JVC the new 1080p-version 120hz processing works better with SLOWER response times, like 8ms, than if you had a panel with "ZEROms" response. See quote from above link below...
-from JVC press release: "An indication of CMD’s ability to deliver sharp images is the panel’s motion picture response time, or MPRT. Though liquid crystal response time has long been used as a measure of LCD TV performance, JVC considers MPRT, a relatively new measurement gaining wider use, to be a better performance indicator. MPRT measures the rate of image blurring and is based on how the human eye perceives speed. A faster MPRT means less blurring.
JVC research shows that for any given liquid crystal response time, the MPRT will be significantly better at 120Hz than at 60Hz. In addition, the improvement is more apparent at lower response times. A 120Hz-driven LCD panel with an eight millisecond liquid crystal response time will achieve an MPRT figure that’s superior to what a 60Hz-driven panel with a zero millisecond liquid crystal response time can achieve. As a result, the 120Hz panel will have less blurring of moving images.
To get the most out of the double-speed full HD panels, JVC will use its fifth generation D.I.S.T. (Digital Image Scaling Technology) engine on the JVC-exclusive 32-bit Genessa chip. This optimizes processing for more natural shades of grey compared to an 8-bit panel. JVC’s 10-bit panel with the Genessa chip also renders more than one billion colors for rich, natural color reproduction. Also, with a 10-bit panel the reproducible color gamut is 102 percent based on the NTSC standard, displaying full edge-to-edge color of an NTSC picture. And finally, the single-chip processing ensures superior detection, analysis and control of the signal in real time.
JVC will launch its new High Speed 2 line this fall, comprised of three sets featuring Clear Motion Drive II – the 47-inch LT-47X898, the 42-inch LT-42X898 and the 37-inch LT-37X898. Each will offer three HDMI (1.3) compatible inputs. They will also feature a new cabinet that pushes JVC’s design mantra of “maximum screen, minimum cabinet” farther than previous models, with a bezel that measures less than 1.5 inches all the way around and a cabinet that is shorter and narrower than previous models in the same screen size."